Select Page

Controls for Scissor Lift SLX

SP-KSM

Part Number: 121022

Need a keyed switch for security? The SP-KSM replaces the standard 3-position key switch (KS-3) where a spring-loaded action is required. It combines the directional functions (Up and Down) with the security of a key switch. Use for low voltage contact closure or multiple switching. This switch is necessary to access the service position of the scissor lifts. 110 V

Lift L.V. Control Station

Part Number: 121246

The Lift L.V. Control Station (wall switch/dry contact) is a 3 position (UP, Stop, Down) switch mounted on white single gang panel that is used to control the Lift L.V. (Lift Low Voltage Control Module). 110 V

R2D7 for RS232 Serial Control

Part Number: C156.066

The serial bridge allows third party control of our low voltage control via serial RS-232 ASCII commands.

Decora RTS 1 Channel Wall Switch

Part Number: C103.042

Battery powered wireless wall switch, with built in RTS that may be personalized for a single window shade or a group of window shades. Up, down and stop functions and “my” favorite position on each channel. Available in 1-5 channels.

Lift L.V. Control Station (220V)

Part Number: 121247

The Low Voltage Control Station is a 3-button control switch for use with the Lift LV Control. It features three buttons for “up”, “stop” and “down” control. 220V 220 V

SP-KSM

Part Number: 121022

Need a keyed switch for security? The SP-KSM replaces the standard 3-position key switch (KS-3) where a spring-loaded action is required. It combines the directional functions (Up and Down) with the security of a key switch. Use for low voltage contact closure or multiple switching. This switch is necessary to access the service position of the scissor lifts.

Lift WRT

Part Number: 121248

Hand-held radio frequency transmitter (WRT). 3-button control lets you stop or change direction at any point. Requires receiver and Draper low voltage control unit. 110 V

Lift WRT/R

Part Number: 121249

Hand-held radio frequency transmitter (WRT). 3-button control lets you stop or change direction at any point. Requires The WRT/R is a hand-held RF transmitter/receiver. 3-button control. The RF receiver plugs into the Lift LV Control, DC Motor Control.receiver and Draper low voltage control unit. 110 V

VIC-12 (Video Interface Control)

Part Number: 121024

Allows screen to be controlled by projector switch–when the projector comes on, the screen descends automatically. The VIC-12 interfaces screen operation with a video projector or tuner featuring a 12V switched outlet.

The VIC-12 can be purchased with an override switch (VIC-OS), permitting independent operation. A VIC is not compatible with a Lift LV Control, built-in or otherwise. 110 V

Lift IRT/R

Part Number: 121251

The IRT/R is an Infrared (IR) transmitter and receiver. 3-button operation. Fully compatible with “learnable” IR master control systems. Receiver plugs into the Lift LV Control or DC Motor Control. 110 V

 

Lift IRT

Part Number: 121250

Infrared transmitter (IRT). Must be used with receiver and low voltage control module. 110 V

 

LVC-S

Part Number: 121225

The Low Voltage Control Station is a 3-button control switch for use with the LVC-IV. It features three buttons for “up”, “stop” and “down” control. Quick connect terminals on the back of the switch connect to the LVC-IV using your own 4-conductor wire. 110 V

 

LVC-S

Part Number: 121231

The Low Voltage Control Station is a 3-button control switch for use with the LVC-IV. It features three buttons for “up”, “stop” and “down” control. Quick connect terminals on the back of the switch connect to the LVC-IV using your own 4-conductor wire. 220 V