Select Page

Standard Window Shade Motor Controls

LVC-IV & LVC-S

Part Number: 121223

Kit contains one (1) LVC-IV control Module and one (1) LVC-S low voltage switch. The LVC-IV low voltage control is used to control one 115V motor by a third party system in a variety of ways

  • Low voltage wall switch
  • “Dry” contact closure
  • RF (radio frequency)
  • IR (infrared)
  • Serial Communication
  • low voltage relay (3v-28v)

Works with LVC-S, WRT, IRT/R, SP-KSM, Aux. “dry” contacts and KS-1 Power Supply Switch.

The LVC-IV is housed in a single box, 3-compartment and UL Listed. A low voltage switch (LVC-S) is included. The module contains:

  • A 3-screw terminal block for a low voltage wall switch
  • An IR receiver jack
  • A built-in RF receiver
  • Two-RJ25 ports for RS232/RS485
  • Alow voltage relay port with cable
  • User-serviceable 3.5 A fuse

WRT Wireless Transmitter – RF Type

Part Number: 121226

Hand-held radio frequency transmitter (WRT). 3-button control lets you stop or change direction at any point. For use with LVC-IV Low Voltage Control Module.

IRT/R

Part Number: 121227

The IRT/R is an Infrared (IR) transmitter/Receiver kit for use with the new LVC-IV Low Voltage Control. Fully compatible with “learnable” IR master control systems. Kit includes one Infrared Transmitter and one Infrared Receiver.Module.

LVC-IV (Low Voltage Control Module)

Part Number: 121222

The LVC-IV low voltage control is used to control one 115V motor by a third party system in a variety of ways:

  • Low voltage wall switch
  • “Dry” contact closure
  • RF (radio frequency)
  • IR (infrared)
  • Serial Communication
  • low voltage relay (3v-28v)

Works with LVC-S, WRT, IRT/R, SP-KSM, Aux. “dry” contacts and KS-1 Power Supply Switch.

The LVC-IV is housed in a single box, 3-compartment and UL Listed. The module contains:

  • A 3-screw terminal block for a low voltage wall switch
  • An IR receiver jack
  • A built-in RF receiver
  • Two-RJ25 ports for RS232/RS485
  • A low voltage relay port with cable
  • A user-serviceable 3.5 A fuse

RTS Receiver for Standard Motor

Part Number: C156.120

 

Individual Group Control (IGC) 4N1 Motor Controller

Part Number: C156.253

Provides individual and group control for up to four motors with up to three intermediate positions per motor. Can be daisy-chained together for simplified synchronized control from a single keypad or automation system. Wire into an automation system for contact closure thru a CAT5 with the RJ45 jack.